1. Order a new remote control from Skylux.​
2. Start pairing mode: press the pairing button (P) on the keypad until you hear 2 beeps (🎵🎵) or the green LED of the keypad on your device flashes twice and then release the button.​
3. Press any button on the new remote control that applies to your Skylux device.
4. Three beeps (🎵🎵🎵) and a green flashing LED on the keypad confirm the new pairing.

1. Press and hold the pairing button on the keypad (P) of the device until you hear 2 beeps (🎵🎵) or the green LED of the keypad on your device flashes twice and then release the button​.
2. Then press any key on the selected remote control.
3. The three subsequent short beeps (🎵🎵🎵) confirm a successful connection.

Attention during grouping:
Pairing multiple devices to one remote control can cause range problems, meaning that not all devices are set equally. To correct this, press the relevant function icon on the remote control for a few seconds within range of the devices. When released, the devices will return to their starting position.

1. Use a remote control that is already paired with the device. If you don't have one, follow the instructions under 'I've lost the remote' and repeat for each additional remote.
2. Press and hold the setup button (⚙️) of the current remote control until you hear 2 beeps (🎵🎵) or the green LED of the keypad on your device flashes twice and then release the button​.
3. Then press any button on the new remote control.
4. Three consecutive beeps (🎵🎵🎵) and a green flashing LED on the keypad confirm successful pairing.

Please note: you can pair a maximum of 10 remote controls per device.

Unpair remote controls

1. Press and hold the reset button (R)​ on the keypad​ until you first hear 2 (🎵🎵) and then 3 beeps (🎵🎵🎵) or the green LED of the keypad on your device flashes three times (this happens after approximately 12s) and then release the button.​

2. The red LED on the keypad now flashes.

3. Confirm the reset by briefly pressing the reset button ‘R’.​

4. Three short beeps (🎵🎵🎵) and a green flashing LED on the keypad confirm the disconnection.

5. If you want to pair the remote control again, follow the instructions for ‘I've lost the remote control’.​